I have a DS918+ which only have 2 GbE port. I’m in the process of upgrading my local network to 10GbE.
At the same time, I don’t want to replace this pricey NAS. I found out that there’s an option to purchase a USB 3.0 2.5G network dongle.
2.5GE is relatively cheap too, less than Php 856.88 in Lazada.
Here’s the drivers:
https://github.com/bb-qq/r8152
Ugreen USB C 2.5
https://github.com/bb-qq/aqc111
5g Qnap
How I replaced the bundled docker-compose on Synology DSM with v2.15.1, plus the compose file I use to run Jellyfin with hardware transcoding.
One of my DSM VMs showed a crashed volume. These are the steps I used to stop services, recreate the RAID array with the same UUID, and get it healthy.
My Xpenology notes for DSM 7.2 on Proxmox: making a boot disk, mounting the bootloader as a USB drive in the VM, and patching AME for HEVC.